Weed control strategies for container nurseries
Joe Neal explains the issues that create a lack of uniformity in herbicide distribution at Cultivate'21 in Columbus, Ohio.
Matt McClellan

Weed control strategies for container nurseries

NC State's Joe Neal shared tips for improving herbicide efficiency with the Cultivate'21 crowd.

Subscribe
July 12, 2021

On Sunday, July 11, Joe Neal, professor of weed science and extension specialist at North Carolina State University, spoke to a crowd of growers at Cultivate'21 who are all facing the same problem: weeds. At his educational session, "Strategies to reduce weed control costs in container nurseries," Neal covered some of the most-common problem weeds and how growers can develop a plan to stop them.

Bittercress is the most-common cool-season weed and spurge is the most-common warm-season weed, Neal said. Spurge is particularly nefarious, requiring only five days to germinate.

Neal asked and answered the big weed control question during his talk: despite effective herbicides, why do weeds continue to emerge? In many cases, the answer is that growers are not rotating effectively.

Neal said that whoever’s in charge of herbicide application at your nursery needs to be adhering to the label. If you apply any herbicide more frequently than it’s meant to be applied, it’s efficacy will drop and your weeds will develop resistance. That’s how a once-stellar herbicide becomes useless. Commonly-used herbicide Broadstar can have 2 applications per year. Barricade and Gemini: also 2 applications per year. Freehand and Tower: 2 applications per year. Snapshot and Gallery: 3 applications per year. Marengo: 2 applications per year.

“None of them say ‘6,’” Neal says.

The NC State Extension website has plenty of charts and sheets that growers can use to develop their own rotation plan, depending on which crops they grow. Check them out here.

Neal also discussed the importance of uniformity in herbicide distribution. A typical application has a 250% variation, he said. That means some plants are getting the correct dose but some may be getting two-and-a-half times more or less than the recommended dose. If you have a variable application rate, you’ll end up with variable weed control, he said.

Calibration of your spreader is a crucial step to improving uniformity. Consistent walking and handle speeds are important to achieving uniform distribution. Neal suggests using a metronome to ensure consistent walking speed. Neal said many growers balk at this and say applicators should just use their smartphone.

“How many of you out there handling pesticides would want to get your phone out and handle it? Don’t ask your employees to do that,” Neal said.

Smartphones are typically difficult to operate with gloves on, and PPE should definitely be used while applying herbicides. Neal suggests buying them a $15 metronome and clipping it to the spreader.

Neal also discussed how the path you take with a spreader affects herbicide distribution. Swath width and directional spreading are areas to address. For instance, if your beds are 10 feet wide with a 12-foot swath width, and you use the left, right and center rudder positions, you will have areas that have heavy herbicide coverage and areas with light coverage. Heavy herbicide coverage could injure crops sensitive to that particular herbicide and areas with light coverage that will be more susceptible to weed infestations.

Neal found that this could be remedied by keeping your beds 6-8 feet wide and using only the center rudder position. Also, applicators should refill when the hopper gets to about 25% full.

Walking pattern also makes a difference. Instead of walking down one row and up the next,  use the single direction, parallel pass method. Calibrate for half the dose, then walk the same path in opposite directions. In tests, Neal found that method resulted in a much more uniform herbicide distribution.

Editor's note: Watch for our State of the Market: Weed Control Report in the August issue of Nursery Management. It will include exclusive market research to find out how growers across North America control weeds in container and field production. Take the survey here!